Introducing the W series stacked arm curve edge banding machine, a cutting-edge solution for all your curved plate banding needs. This innovative machine is designed to operate a variety of curved plates, including rectangles and ovals, making it a versatile choice for any project.
What's new in W3:
| Model | W1 | W2 | W3 |
| Supply voltage | 220V/50HZ | 220V/50HZ | 220V/50HZ |
| Total power | 1.4KW | 1.4KW | 3.4KW |
| Air pressure | 0.5-0.8Mpa | 0.5-0.8Mpa | 0.5-0.8Mpa |
| Motor power | 0.18KW | 0.18KW | 0.18KW |
| Thickness of sealing strip | 0,4-2mm | 0,4-2mm | 0,4-2mm |
| Width of sealing strip | 8-50mm | 8-50mm | 8-50mm |
| Auxiliary pressure roller | x | x | √ |
| Hot air auxiliary | x | x | √ |
| Automatic cleaning | x | x | √ |
| Weight | 145kg | 210kg | 240kg |
| Packing size | 970*850*1100mm | 1300*1120*1250mm | 1305*1125*1250mm |
W1:
Glue application: Grid-shaped glue application roller,glue is applied evenly and adheres firmly.
White shaft positioning: Remove the small white shaft andfix the suction cup on the hole, making it easy to seal the small plate.
W2:
Control panel: using Delixi electrical components, digital displaytemperature controller, timer belt break, electronic speed regulator.
Dual cylinder control: control knife and tape feeding, high-qualityknife, fast cutting without burs.
W3:
Automatic glue removal, the laminating wheel is not easy to stickglue, ensuring the edge sealing effect.
The auxiliary pressure wheel, after two pressings, increases thebonding firmness.
Hot air assistance improves the adhesion of the edge banding strip.
Automatic glue cleaning
The bonding wheel is not easy to glue, and the plate is clean.
Auxiliary automatic feeding
The sheet and edge banding are more firmly pasted.
Hot air assist
Heat after gluing to increase the firmness of the paste.
Control panel
Simple operation and easy sealing.
