| Quantity: | |
|---|---|
Oblique straight edge; full-pass J-shaped; C-shaped; half-passJ-shaped front, middle, and rear; diamond large size
left/right,small size leftright; half-pass right circle, first half-pass left circlemiddle circle; water drop large size
left/right, small size left/right:diamond large size,small size; arc large size, small size.
Straight edge pre-milling,Form milling,Arc gluing,Edge banding and gluing,Facade bonding,Forming bonding,Rough trimming,End cutting,Fine-trimming,Scraping,Polishing.
| Model | JC-510 | Supply voltage | 380V/50HZ |
| Board thickness | 18mm、22mm、25mm | Air pressure | 0.6-0.8Mpa |
| Minimum board size | ≥380*150mm | External vacuum | Vacuum port 150mmx3pcs |
| Types of edge banding | PVC | Volume of gas storage tank | 5L+5L |
| Edge banding thickness | Soft forming 0.52-0.8mm Oblique straight edge 0.5-2mm | Feed speed | 9m/min |
| Edge banding width | 5-70mm | Operating temperature of glue pot | 110℃-210℃ |
| Hot melt adhesive type | EVA | Dimensions | 9620*1310*2060mm |
| Glue pot capacity | 2600ml | Electric lift | 380V 0.37KW |
| Total power | 72kW | Total milling power | 38.9kW |
